Diamond Coating Epoxy Flooring Kitchener- Important Points

Epoxy floor coatings are being requested more and more by home owners who want to add a layer of protection to their garage floors and/or make it look better than the old concrete that it already has. The application of an epoxy coating will leave the floor with a long-lasting finish that protects the concrete from damage caused by water or chemicals. They make it easy to keep floors clean and the shine lasts for a long time. Although many of the applications are made in newly built homes, do-it-yourselves can also turn applying a coating to their existing concrete floor a DIY project. Visit Diamond Coating Epoxy Flooring Kitchener.

1. The first step is to choose the coating that will provide you with the best results. There are basically three different types of coatings to choose from: 100% Solids, Water-Based, and Solvent-Based. Most professionals recommend not using the water-based coating on your garage floor as it is meant to be used as a primer in spite of the fact that it is what is included in many DIY kits. This type of coating does guard against stains, chemicals and abrasion but existing concrete needs to be de-greased prior to application. The same is true for the solvent-based epoxy as the type of solvent used is often non-compliant with modern VO regulations.

The 100% Solid epoxy floor coatings are the most durable of the three types, making them the most recommended for applying to garage floors. While this type is typically more expensive than the others, it is effective at protecting the floor in high-traffic areas, tire marks, abrasives and chemicals. It is also highly durable, lasting for as long as 20 years. Also, consider whether you want skid-resistant additives that will prevent the floor from being dangerous to walk on when wet.

2. Prep the floor. While this is the most time-intensive part of the process, failure to properly prepare the floor will often results in floor failure. If the concrete has been smoothly trowel, it will need to be roughened by using shot blasting or acid washing. Again, the easier choice is the acid washing but shot blasting will provide better results. If you decide to do the job right, local equipment rentals should have the shot blaster equipment needed for the process. However, many professionals get sufficient results by mopping on and rinsing off muriatic acid. Part of the prep also includes filling cracks and holes.

3. Epoxy floor coatings are usually applied with a roller, although brushes can also be used. After the first coat, allow the epoxy to cure overnight. Apply a second coat and wait another night to cure. You may want to add another coat but never apply less than two.

4. Decide if you need to add a urethane coat to the top of the epoxy for added strength and to improve abrasion resistance. Most believe this is unnecessary but the choice is up to you.

If you have moisture problems in your garage, you may want to hire professionals to apply epoxy floor coatings so that they can address the problems before they apply. Otherwise, you could end up with problems that shorten the lifespan of your new floor.

Diamond Coating Epoxy Flooring Toronto for Homeowners

The usage of an epoxy floor coating has been long realized to make concrete floors elegant and to protect it from damage. Because of its toughness and durability, it is commonly used on industrial floors. Aside from these, it is also known to be resistant to oil, grease, and other chemicals that can destroy floors. In the earlier years, only merchandise stores used epoxy floor coating but in recent years, it has become a trend for home and garage use. Visit Diamond Coating Epoxy Flooring Toronto.

Many homeowners would want someone to apply the epoxy floor coating, but you can still have it done by yourself. Here’s how. First, you need to measure your floor in order to know how much epoxy floor coating you need to buy. After which, you need to buy an epoxy paint and an epoxy paint hardener-most likely be given to you in one package. Never be confused with an outdoor and indoor epoxy paint as well as swimming pool epoxy paint. Ask the person in charge of the market on paints to have a clear view on what kind you need to buy. Otherwise, you can buy a floor coating kit online that has a DVD manual with it.

It is important to clean the floor as thoroughly as possible. Wash the floor with water and dish soap, allow it to dry afterwards. If you have a hard time cleaning floors with grease stains on it, you can buy a degreaser at a hardware store. Let the degreaser work its job then wipe it with a cloth and rinse it up with water.

Scrape the floor. You must wear protective gloves and mask while doing this procedure because it involves the use of muriatic acid. Mix the muriatic acid and water and rinse it after with cold water. A cup of muriatic acid is good enough for a gallon of water. Don’t use cloth to apply the mixture, use a stick broom instead.

If you have a manual, you have the knowledge of how much of the hardener and epoxy paint you will need. Mix the two for about 5 minutes and leave it for 30 minutes after. It is important to first paint the edges using a small brush to have a good coating in the cracks. Use a rolling paint to spread the mixture across the floor. Be sure to have a neat application. In other words, you must start at one corner; never skip areas. And after 24 hours, you now have an epoxy floor coating -all done by yourself.

How To Install Garage Floor Epoxy and Make It Last

In home improvement, one of the main growth areas is upgrading the garage to provide more accessible space. With a high ceiling height, a standard residential two car garage is approximately 450 square feet. The wall space in most garages is ample and unused. From garden instruments to gold clubs and skis, wall panels can be mounted to hang anything. You may find more details about this at this reference.

With lots of precious space going to waste, the ceiling area is rarely used. There are several businesses that can quickly be lifted and lowered with pulley systems and shelving. In many price ranges, from plain shelves to high quality, compact steel shelving, there are many options for wall cabinets. There is just about every kind of storage device available if you just need a little extra storage room to create the perfect room for a range of vehicles.

For any garage owner, the greatest obstacle, no matter what price point you are at, is the garage floor. Here are the theories why.

Concrete is Damp-The common issue with moisture vapour is the toughest fight for any floor coating. Moisture vapour is not visible to the naked eye, but when you step into a garage or cellar, you can detect it. It’s porous concrete. The hardness of concrete is equated with granite by several individuals, but they are very different. It is wet once concrete is poured. The moisture moves upwards and evaporates as it dries and heals. It leaves a porous trail behind as the moisture passes upwards. Via these small holes, moisture pressure from below the concrete slab forces a vapour upward. This can delaminate or chip paints and coatings.

Bond Breakers are anything that can slip off your vehicle, truck or machinery, such as oil and grease, and reach your concrete floor’s porous surface. You are at risk of failure if this is not removed prior to the application of garage floor paint or an epoxy shield coating.

Efflorescence-Efflorescence is the culprit if you have ever encountered endless dust on your house. Usually, this is caused by moisture vapour moving the concrete calcium to the surface. You’ll find dry, chalky dust on the floor in more serious situations.

The choices are to etch the surface first to open the surface pores and build more surface area to stick to your epoxy shield coating. The greater the surface area, the greater the adhesion of the moisture pressure and the capping mechanism.

You will need a degreaser that will suck oil out of the floor if you find any places where there is grease or oil. Etching should not act as a degreaser for a liquid etching solution.

Using a mechanical grinder or shot blasting machine to abraid the surface is one of the better remedies for prepping the surface first. These devices serve the same purpose, but with better performance, as with a liquid etching solution. This equipment is transported by several nearby home improvement and tool rental stores. It only takes a small two car garage a few hours to grind or shotblast with very little cleanup and no use of water.

If you intend to treat the floor with an acid solution, allow the floor to dry completely for a few days afterwards. Stop adding the surface of a wet floor to any epoxy shield coatings or paints. This will trap moisture, eventually causing the floor, regardless of consistency, to chip and peel.

The application of an epoxy shield coating or paint is a simple method of rolling on or using a squeegee and roller once the floor is completely prepped. In a garage, two coats are common. The first is a primer and the second, a protective coat of high construction.

Despite what the manufacturer claims, once you let it dry, it is advised to let the new coating dry for around 6-7 days. Although a fresh coating is dry to the touch or to walk on, for at least 6-7 days it probably hasn’t had a chance to heal entirely. Considering the careful preparation and application of your epoxy shield coating or paint will last for years with a bright surface that is easy to clean, the wait is worth it.